Flooring & Tiling calculator
Herringbone Tile Calculator
Calculate herringbone tile quantity with additional cutting waste from surface area, tile size, box quantity and a cutting-waste allowance.
Calculate herringbone tile quantity with additional cutting waste from surface area, tile size, box quantity and a cutting-waste allowance. The tool is designed for transparent planning: you can see the measurements, product assumptions and allowance that drive the result. Review herringbone cuts and border waste before ordering or setting out. Herringbone layouts create more triangular and end cuts than a straight grid. A higher waste allowance is usually sensible, especially with fixed colour batches.
What you need to enter
The Herringbone Tile Calculator uses the following project information to calculate the result.
- Surface area
- Tile length
- Tile width
- Waste (%)
- Tiles per box
Calculator result
Tiles and optional boxes required
How the Herringbone Tile Calculator works
This page is built around surface area with waste ÷ tile face area. Applied to tile quantity for a herringbone layout with additional cutting waste, the engine first converts compatible measurements to a common basis and then calculates tiles and optional boxes required. Verify herringbone cuts and border waste before treating the output as a buying, sizing or set-out figure.
Herringbone Tile Calculator worked example
Herringbone Tile Calculator example: For 12 m² of herringbone tiling using 600 × 300 mm tiles, each tile covers 0.18 m². After a 10% waste allowance, the theoretical count is about 74 tiles; if a box contains 8, the order rounds up to 10 boxes. This example shows the arithmetic only; on a live job, review herringbone cuts and border waste before turning the result into an order or final size.
Important calculation assumptions
For tile quantity for a herringbone layout with additional cutting waste, herringbone layouts create more triangular and end cuts than a straight grid. A higher waste allowance is usually sensible, especially with fixed colour batches.
Frequently asked questions
What project details should I have ready for the Herringbone Tile Calculator?
The quality of the result starts with the inputs. Measure the tiled surface, enter the actual tile dimensions and box quantity, then choose waste for cuts and the intended layout. They are used here to estimate tile quantity for a herringbone layout with additional cutting waste.
Should I use a default value for herringbone cuts and border waste in the Herringbone Tile Calculator?
In the Herringbone Tile Calculator, errors in herringbone cuts and border waste can materially affect the result. Herringbone layouts create more triangular and end cuts than a straight grid. A higher waste allowance is usually sensible, especially with fixed colour batches.
Should I order exactly the amount shown by the Herringbone Tile Calculator?
For the Herringbone Tile Calculator, after calculating, round up to whole tiles and then whole boxes where a box count is entered. Keep spare matching tiles for breakage and later repairs, particularly with batch-sensitive finishes.